|Place of Origin:||YIXING,CHINA|
uv quartz cell,
quartz glass cuvette
Inside screw cap 10mm,avoiding leaking and evaporating UV cuvette,Highest purified JGS1, full high temperature fused
Polished windows: 2
External: Height 48mm x Width 12.50mm x Deep 12.50mm
With Screw Cap Head and cap
Hole: 3.20m and with a septum made of PTFE
Because of its application, put out the strictly requirement for its material iteself. Material advantage will effect the cuvettes' sensibility. We use the top grade quartz material in China to guarantee a good quality of the cuvettes, following is the curve for the JGS1 material, you could find it present very well from 200nm to 280nm:
We use the top grade materials want to guarantee the top quality:
We are not use the common materials:
|Common Standard||JGS1(International Standard)|
|1||T%||decided by the light path direction: data is different if the light from "left to right" through the clear windows compare the light from "right to left".||All direction are same|
|2||Abs||Can't check as the Curve is very ugly and irregular.||the curve is smooth and flat|
|3||Material||low costs,common quartz||JGS1 which is the highest in China, UV Silica|
|4||Matched||Not be matched, as its digital number changs when you check it.||Matched, tolerance is under 0.3%|
Supply a hole approximately 3.2 mm in diameter and a septum that appears to be made of PTFE
Above are small spiral, we have below big spiral 12mm.
Our cuvettes/cells are made of high quality quartz and glass and are compatible with most spectrophotometers and fluorometers in the market, we offer you equal or better quality than our competition but with affordable prices.
Why pay more for your cuvettes/cells ? We are your best option in China.
Contact Person: admin